LibreOffice Module svx (master) 1
|
#include <svdouno.hxx>
Public Member Functions | |
SdrUnoObj (SdrModel &rSdrModel, const OUString &rModelName) | |
SdrUnoObj (SdrModel &rSdrModel, SdrUnoObj const &rSource) | |
SdrUnoObj (SdrModel &rSdrModel, const OUString &rModelName, const css::uno::Reference< css::lang::XMultiServiceFactory > &rxSFac) | |
virtual | ~SdrUnoObj () override |
virtual void | TakeObjInfo (SdrObjTransformInfoRec &rInfo) const override |
virtual SdrObjKind | GetObjIdentifier () const override |
virtual rtl::Reference< SdrObject > | CloneSdrObject (SdrModel &rTargetModel) const override |
virtual void | NbcResize (const Point &rRef, const Fraction &xFact, const Fraction &yFact) override |
virtual void | NbcSetLayer (SdrLayerID nLayer) override |
virtual bool | hasSpecialDrag () const override |
The standard transformations (Move,Resize,Rotate,Mirror,Shear) are taken over by the View (TakeXorPoly(),...). More... | |
virtual OUString | TakeObjNameSingul () const override |
virtual OUString | TakeObjNamePlural () const override |
virtual void | SetContextWritingMode (const sal_Int16 _nContextWritingMode) override |
const css::uno::Reference< css::awt::XControlModel > & | GetUnoControlModel () const |
css::uno::Reference< css::awt::XControl > | GetUnoControl (const SdrView &_rView, const OutputDevice &_rOut) const |
css::uno::Reference< css::awt::XControl > | GetTemporaryControlForWindow (const vcl::Window &_rWindow, css::uno::Reference< css::awt::XControlContainer > &_inout_ControlContainer) const |
Retrieves a temporary XControl instance for a given output device. More... | |
const OUString & | GetUnoControlTypeName () const |
const OUString & | getUnoControlModelTypeName () const |
virtual void | SetUnoControlModel (const css::uno::Reference< css::awt::XControlModel > &xModel) |
Public Member Functions inherited from SdrRectObj | |
SdrRectObj (SdrModel &rSdrModel) | |
The corner radius parameter is dropped at some point. More... | |
SdrRectObj (SdrModel &rSdrModel, const tools::Rectangle &rRect) | |
SdrRectObj (SdrModel &rSdrModel, SdrObjKind eNewTextKind) | |
SdrRectObj (SdrModel &rSdrModel, SdrObjKind eNewTextKind, const tools::Rectangle &rRect) | |
SdrRectObj (SdrModel &rSdrModel, SdrRectObj const &rSource) | |
virtual void | TakeObjInfo (SdrObjTransformInfoRec &rInfo) const override |
virtual SdrObjKind | GetObjIdentifier () const override |
virtual void | TakeUnrotatedSnapRect (tools::Rectangle &rRect) const override |
virtual OUString | TakeObjNameSingul () const override |
virtual OUString | TakeObjNamePlural () const override |
virtual rtl::Reference< SdrObject > | CloneSdrObject (SdrModel &rTargetModel) const override |
virtual void | RecalcSnapRect () override |
Snap is not done on the BoundRect but if possible on logic coordinates (i.e. More... | |
virtual void | NbcSetSnapRect (const tools::Rectangle &rRect) override |
virtual void | NbcSetLogicRect (const tools::Rectangle &rRect) override |
virtual basegfx::B2DPolyPolygon | TakeXorPoly () const override |
The Xor-Polygon is required by the View to drag the object. More... | |
virtual sal_uInt32 | GetHdlCount () const override |
Via GetHdlCount the number of Handles can be retrieved. More... | |
virtual void | AddToHdlList (SdrHdlList &rHdlList) const override |
virtual bool | hasSpecialDrag () const override |
The standard transformations (Move,Resize,Rotate,Mirror,Shear) are taken over by the View (TakeXorPoly(),...). More... | |
virtual bool | beginSpecialDrag (SdrDragStat &rDrag) const override |
virtual bool | applySpecialDrag (SdrDragStat &rDrag) override |
virtual OUString | getSpecialDragComment (const SdrDragStat &rDrag) const override |
virtual basegfx::B2DPolyPolygon | TakeCreatePoly (const SdrDragStat &rDrag) const override |
Polygon dragged by the user when creating the object. More... | |
virtual PointerStyle | GetCreatePointer () const override |
get the cursor/pointer that signals creating this object More... | |
virtual void | NbcMove (const Size &rSiz) override |
The methods Move, Resize, Rotate, Mirror, Shear, SetSnapRect and SetLogicRect call the corresponding Nbc-methods, send a Repaint broadcast and set the Modified state on the Model. More... | |
virtual void | NbcResize (const Point &rRef, const Fraction &xFact, const Fraction &yFact) override |
virtual void | NbcRotate (const Point &rRef, Degree100 nAngle, double sn, double cs) override |
virtual void | NbcMirror (const Point &rRef1, const Point &rRef2) override |
virtual void | NbcShear (const Point &rRef, Degree100 nAngle, double tn, bool bVShear) override |
virtual SdrGluePoint | GetVertexGluePoint (sal_uInt16 nNum) const override |
virtual SdrGluePoint | GetCornerGluePoint (sal_uInt16 nNum) const override |
virtual rtl::Reference< SdrObject > | DoConvertToPolyObj (bool bBezier, bool bAddText) const override |
virtual void | Notify (SfxBroadcaster &rBC, const SfxHint &rHint) override |
Detects when a stylesheet is changed. More... | |
Public Member Functions inherited from SdrTextObj | |
const Point & | GetTextEditOffset () const |
void | SetTextEditOffset (const Point &rNew) |
bool | IsInEditMode () const |
void | SetTextLink (const OUString &rFileName, const OUString &rFilterName) |
void | ReleaseTextLink () |
bool | IsLinkedText () const |
bool | ReloadLinkedText (bool bForceLoad) |
bool | LoadText (const OUString &rFileName, rtl_TextEncoding eCharSet) |
virtual bool | AdjustTextFrameWidthAndHeight (tools::Rectangle &rR, bool bHgt=true, bool bWdt=true) const |
virtual bool | NbcAdjustTextFrameWidthAndHeight (bool bHgt=true, bool bWdt=true) |
virtual bool | AdjustTextFrameWidthAndHeight () |
bool | IsTextFrame () const |
bool | IsOutlText () const |
bool | IsAutoFit () const |
returns true if the PPT autofit of text into shape bounds is enabled. implies IsFitToSize()==false! More... | |
bool | IsFitToSize () const |
returns true if the old feature for fitting shape content should into shape is enabled. implies IsAutoFit()==false! More... | |
SdrTextObj * | GetNextLinkInChain () const |
void | SetNextLinkInChain (SdrTextObj *) |
SdrTextObj * | GetPrevLinkInChain () const |
bool | IsChainable () const |
bool | GetPreventChainable () const |
TextChain * | GetTextChain () const |
SdrObjKind | GetTextKind () const |
virtual bool | HasText () const override |
bool | IsTextEditActive () const |
virtual SdrText * | getActiveText () const |
returns the currently active text. More... | |
virtual SdrText * | getText (sal_Int32 nIndex) const override |
returns the nth available text. More... | |
virtual sal_Int32 | getTextCount () const override |
returns the number of texts available for this object. More... | |
virtual bool | IsReallyEdited () const |
returns true only if we are in edit mode and the user actually changed anything More... | |
virtual void | setActiveText (sal_Int32 nIndex) |
changes the current active text More... | |
virtual sal_Int32 | CheckTextHit (const Point &rPnt) const |
returns the index of the text that contains the given point or -1 More... | |
void | SetDisableAutoWidthOnDragging (bool bOn) |
void | NbcSetText (const OUString &rStr) |
void | SetText (const OUString &rStr) |
void | NbcSetText (SvStream &rInput, const OUString &rBaseURL, EETextFormat eFormat) |
void | SetText (SvStream &rInput, const OUString &rBaseURL, EETextFormat eFormat) |
virtual const Size & | GetTextSize () const |
void | FitFrameToTextSize () |
double | GetFontScale () const |
double | GetSpacingScale () const |
virtual void | TakeTextRect (SdrOutliner &rOutliner, tools::Rectangle &rTextRect, bool bNoEditText, tools::Rectangle *pAnchorRect, bool bLineWidth=true) const |
void | AdjustRectToTextDistance (tools::Rectangle &rAnchorRect) const |
virtual void | TakeTextAnchorRect (::tools::Rectangle &rAnchorRect) const |
const GeoStat & | GetGeoStat () const |
tools::Long | GetEckenradius () const |
virtual bool | IsAutoGrowHeight () const |
tools::Long | GetMinTextFrameHeight () const |
tools::Long | GetMaxTextFrameHeight () const |
virtual bool | IsAutoGrowWidth () const |
tools::Long | GetMinTextFrameWidth () const |
tools::Long | GetMaxTextFrameWidth () const |
css::drawing::TextFitToSizeType | GetFitToSize () const |
const tools::Rectangle & | GetGeoRect () const |
virtual bool | IsFontwork () const |
bool | IsHideContour () const |
bool | IsContourTextFrame () const |
SdrTextHorzAdjust | GetTextHorizontalAdjust (const SfxItemSet &rSet) const |
SdrTextHorzAdjust | GetTextHorizontalAdjust () const |
SdrTextVertAdjust | GetTextVerticalAdjust (const SfxItemSet &rSet) const |
SdrTextVertAdjust | GetTextVerticalAdjust () const |
tools::Long | GetTextLeftDistance () const |
Left inner spacing to borders More... | |
tools::Long | GetTextRightDistance () const |
Right inner spacing to borders More... | |
tools::Long | GetTextUpperDistance () const |
Top inner spacing to borders. More... | |
tools::Long | GetTextLowerDistance () const |
Bottom inner spacing to borders. More... | |
SdrTextAniKind | GetTextAniKind () const |
SdrTextAniDirection | GetTextAniDirection () const |
bool | HasTextColumnsNumber () const |
sal_Int16 | GetTextColumnsNumber () const |
void | SetTextColumnsNumber (sal_Int16 nColumns) |
bool | HasTextColumnsSpacing () const |
sal_Int32 | GetTextColumnsSpacing () const |
void | SetTextColumnsSpacing (sal_Int32 nSpacing) |
virtual void | handlePageChange (SdrPage *pOldPage, SdrPage *pNewPage) override |
virtual void | TakeObjInfo (SdrObjTransformInfoRec &rInfo) const override |
virtual SdrObjKind | GetObjIdentifier () const override |
virtual void | TakeUnrotatedSnapRect (tools::Rectangle &rRect) const |
virtual OUString | TakeObjNameSingul () const override |
virtual OUString | TakeObjNamePlural () const override |
virtual rtl::Reference< SdrObject > | CloneSdrObject (SdrModel &rTargetModel) const override |
virtual basegfx::B2DPolyPolygon | TakeXorPoly () const override |
The Xor-Polygon is required by the View to drag the object. More... | |
virtual basegfx::B2DPolyPolygon | TakeContour () const override |
contour for TextToContour More... | |
virtual void | RecalcSnapRect () override |
Snap is not done on the BoundRect but if possible on logic coordinates (i.e. More... | |
virtual void | NbcSetSnapRect (const tools::Rectangle &rRect) override |
virtual void | NbcSetLogicRect (const tools::Rectangle &rRect) override |
virtual const tools::Rectangle & | GetLogicRect () const override |
virtual Degree100 | GetRotateAngle () const override |
virtual Degree100 | GetShearAngle (bool bVertical=false) const override |
virtual sal_uInt32 | GetSnapPointCount () const override |
snap to special points of an Object (polygon points, center of circle) More... | |
virtual Point | GetSnapPoint (sal_uInt32 i) const override |
virtual sal_uInt32 | GetHdlCount () const override |
Via GetHdlCount the number of Handles can be retrieved. More... | |
virtual void | AddToHdlList (SdrHdlList &rHdlList) const override |
virtual bool | hasSpecialDrag () const override |
The standard transformations (Move,Resize,Rotate,Mirror,Shear) are taken over by the View (TakeXorPoly(),...). More... | |
virtual bool | applySpecialDrag (SdrDragStat &rDrag) override |
virtual OUString | getSpecialDragComment (const SdrDragStat &rDrag) const override |
virtual bool | BegCreate (SdrDragStat &rStat) override |
Every object must be able to create itself interactively. More... | |
virtual bool | MovCreate (SdrDragStat &rStat) override |
virtual bool | EndCreate (SdrDragStat &rStat, SdrCreateCmd eCmd) override |
virtual bool | BckCreate (SdrDragStat &rStat) override |
virtual void | BrkCreate (SdrDragStat &rStat) override |
virtual basegfx::B2DPolyPolygon | TakeCreatePoly (const SdrDragStat &rDrag) const override |
Polygon dragged by the user when creating the object. More... | |
virtual PointerStyle | GetCreatePointer () const override |
get the cursor/pointer that signals creating this object More... | |
virtual void | NbcMove (const Size &rSiz) override |
The methods Move, Resize, Rotate, Mirror, Shear, SetSnapRect and SetLogicRect call the corresponding Nbc-methods, send a Repaint broadcast and set the Modified state on the Model. More... | |
virtual void | NbcResize (const Point &rRef, const Fraction &xFact, const Fraction &yFact) override |
virtual void | NbcRotate (const Point &rRef, Degree100 nAngle, double sn, double cs) override |
virtual void | NbcMirror (const Point &rRef1, const Point &rRef2) override |
virtual void | NbcShear (const Point &rRef, Degree100 nAngle, double tn, bool bVShear) override |
virtual bool | HasTextEdit () const override |
virtual bool | BegTextEdit (SdrOutliner &rOutl) |
virtual void | TakeTextEditArea (Size *pPaperMin, Size *pPaperMax, tools::Rectangle *pViewInit, tools::Rectangle *pViewMin) const |
virtual void | EndTextEdit (SdrOutliner &rOutl) |
virtual EEAnchorMode | GetOutlinerViewAnchorMode () const |
virtual void | NbcSetOutlinerParaObject (std::optional< OutlinerParaObject > pTextObject) override |
void | NbcSetOutlinerParaObjectForText (std::optional< OutlinerParaObject > pTextObject, SdrText *pText) |
virtual OutlinerParaObject * | GetOutlinerParaObject () const override |
bool | CanCreateEditOutlinerParaObject () const |
std::optional< OutlinerParaObject > | CreateEditOutlinerParaObject () const |
virtual void | NbcReformatText () override |
virtual bool | CalcFieldValue (const SvxFieldItem &rField, sal_Int32 nPara, sal_uInt16 nPos, bool bEdit, std::optional< Color > &rpTxtColor, std::optional< Color > &rpFldColor, std::optional< FontLineStyle > &rpFldLineStyle, OUString &rRet) const |
virtual rtl::Reference< SdrObject > | DoConvertToPolyObj (bool bBezier, bool bAddText) const override |
void | SetTextEditOutliner (SdrOutliner *pOutl) |
void | SetupOutlinerFormatting (SdrOutliner &rOutl, tools::Rectangle &rPaintRect) const |
Setup given Outliner equivalently to SdrTextObj::Paint() More... | |
void | UpdateOutlinerFormatting (SdrOutliner &rOutl, tools::Rectangle &rPaintRect) const |
Update given Outliner equivalently to SdrTextObj::Paint() More... | |
void | ForceOutlinerParaObject () |
virtual bool | IsVerticalWriting () const |
virtual void | SetVerticalWriting (bool bVertical) |
bool | IsTopToBottom () const |
virtual void | onEditOutlinerStatusEvent (EditStatus *pEditStatus) |
called from the SdrObjEditView during text edit when the status of the edit outliner changes More... | |
void | onChainingEvent () |
called from the SdrObjEditView during text edit when a chain of boxes is to be updated More... | |
virtual bool | TRGetBaseGeometry (basegfx::B2DHomMatrix &rMatrix, basegfx::B2DPolyPolygon &rPolyPolygon) const override |
virtual void | TRSetBaseGeometry (const basegfx::B2DHomMatrix &rMatrix, const basegfx::B2DPolyPolygon &rPolyPolygon) override |
void | RemoveOutlinerCharacterAttribs (const std::vector< sal_uInt16 > &rCharWhichIds) |
iterates over the paragraphs of a given SdrObject and removes all hard set character attributes with the which ids contained in the given vector More... | |
GDIMetaFile * | GetTextScrollMetaFileAndRectangle (tools::Rectangle &rScrollRectangle, tools::Rectangle &rPaintRectangle) |
void | SetTextAnimationAllowed (bool bNew) |
void | SetObjectItemNoBroadcast (const SfxPoolItem &rItem) |
double | GetCameraZRotation () const |
void | impDecomposeContourTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrContourTextPrimitive2D &rSdrContourTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impDecomposePathTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrPathTextPrimitive2D &rSdrPathTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impDecomposeBlockTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrBlockTextPrimitive2D &rSdrBlockTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impDecomposeAutoFitTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrAutoFitTextPrimitive2D &rSdrAutofitTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impDecomposeStretchTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrStretchTextPrimitive2D &rSdrStretchTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impDecomposeChainedTextPrimitive (drawinglayer::primitive2d::Primitive2DContainer &rTarget, const drawinglayer::primitive2d::SdrChainedTextPrimitive2D &rSdrChainedTextPrimitive, const drawinglayer::geometry::ViewInformation2D &aViewInformation) const |
void | impHandleChainingEventsDuringDecomposition (SdrOutliner &rOutliner) const |
void | impGetBlinkTextTiming (drawinglayer::animation::AnimationEntryList &rAnimList) const |
void | impGetScrollTextTiming (drawinglayer::animation::AnimationEntryList &rAnimList, double fFrameLength, double fTextLength) const |
virtual bool | IsSdrTextObj () const final |
Public Member Functions inherited from SdrAttrObj | |
bool | HasFill () const |
bool | HasLine () const |
virtual const tools::Rectangle & | GetSnapRect () const override |
Public Member Functions inherited from SdrObject | |
virtual const std::shared_ptr< svx::diagram::IDiagramHelper > & | getDiagramHelper () const |
bool | isDiagram () const |
const SdrObject * | getFillGeometryDefiningShape () const |
SdrObject (SdrModel &rSdrModel) | |
SdrObject (SdrModel &rSdrModel, SdrObject const &rSource) | |
virtual void SAL_CALL | acquire () noexcept override final |
virtual void SAL_CALL | release () noexcept override final |
SdrPage * | getSdrPageFromSdrObject () const |
SdrModel & | getSdrModelFromSdrObject () const |
virtual SdrObjList * | getChildrenOfSdrObject () const |
SdrObjList * | getParentSdrObjListFromSdrObject () const |
SdrObject * | getParentSdrObjectFromSdrObject () const |
virtual void | handlePageChange (SdrPage *pOldPage, SdrPage *pNewPage) |
void | AddObjectUser (sdr::ObjectUser &rNewUser) |
void | RemoveObjectUser (sdr::ObjectUser &rOldUser) |
sdr::contact::ViewContact & | GetViewContact () const |
virtual sdr::properties::BaseProperties & | GetProperties () const |
void | ActionChanged () const |
void | SetRelativeWidth (double nValue) |
void | SetRelativeWidthRelation (sal_Int16 eValue) |
void | SetRelativeHeight (double nValue) |
void | SetRelativeHeightRelation (sal_Int16 eValue) |
const double * | GetRelativeWidth () const |
sal_Int16 | GetRelativeWidthRelation () const |
const double * | GetRelativeHeight () const |
sal_Int16 | GetRelativeHeightRelation () const |
virtual void | SetBoundAndSnapRectsDirty (bool bNotMyself=false, bool bRecursive=true) |
virtual void | SetBoundRectDirty () |
SfxItemPool & | GetObjectItemPool () const |
void | AddListener (SfxListener &rListener) |
void | RemoveListener (SfxListener &rListener) |
void | AddReference (SdrVirtObj &rVrtObj) |
void | DelReference (SdrVirtObj &rVrtObj) |
virtual SdrInventor | GetObjInventor () const |
virtual SdrObjKind | GetObjIdentifier () const |
virtual void | TakeObjInfo (SdrObjTransformInfoRec &rInfo) const |
virtual SdrLayerID | GetLayer () const |
virtual void | NbcSetLayer (SdrLayerID nLayer) |
virtual void | SetLayer (SdrLayerID nLayer) |
bool | isVisibleOnAnyOfTheseLayers (const SdrLayerIDSet &rSet) const |
void | SendUserCall (SdrUserCallType eUserCall, const tools::Rectangle &rBoundRect) const |
virtual void | SetName (const OUString &rStr, const bool bSetChanged=true) |
virtual const OUString & | GetName () const |
void | MakeNameUnique () |
void | MakeNameUnique (std::unordered_set< OUString > &rNameSet) |
virtual void | SetTitle (const OUString &rStr) |
virtual OUString | GetTitle () const |
virtual void | SetDescription (const OUString &rStr) |
virtual OUString | GetDescription () const |
virtual void | SetDecorative (bool isDecorative) |
virtual bool | IsDecorative () const |
bool | IsGroupObject () const |
virtual SdrObjList * | GetSubList () const |
sal_uInt32 | GetOrdNum () const |
The order number (aka ZOrder, aka z-index) determines whether a SdrObject is located above or below another. More... | |
void | SetOrdNum (sal_uInt32 nNum) |
void | GetGrabBagItem (css::uno::Any &rVal) const |
virtual void | SetGrabBagItem (const css::uno::Any &rVal) |
sal_uInt32 | GetNavigationPosition () const |
virtual const tools::Rectangle & | GetCurrentBoundRect () const |
virtual const tools::Rectangle & | GetLastBoundRect () const |
virtual void | RecalcBoundRect () |
void | BroadcastObjectChange () const |
const SfxBroadcaster * | GetBroadcaster () const |
virtual void | SetChanged () |
void | SingleObjectPainter (OutputDevice &rOut) const |
bool | LineGeometryUsageIsNecessary () const |
virtual bool | HasLimitedRotation () const |
virtual rtl::Reference< SdrObject > | CloneSdrObject (SdrModel &rTargetModel) const =0 |
SdrObject & | operator= (const SdrObject &rObj)=delete |
SdrObject & | operator= (SdrObject &&rObj)=delete |
virtual OUString | TakeObjNameSingul () const |
virtual OUString | TakeObjNamePlural () const |
virtual basegfx::B2DPolyPolygon | TakeXorPoly () const |
The Xor-Polygon is required by the View to drag the object. More... | |
virtual basegfx::B2DPolyPolygon | TakeContour () const |
contour for TextToContour More... | |
virtual sal_uInt32 | GetHdlCount () const |
Via GetHdlCount the number of Handles can be retrieved. More... | |
virtual void | AddToPlusHdlList (SdrHdlList &rHdlList, SdrHdl &rHdl) const |
virtual void | AddToHdlList (SdrHdlList &rHdlList) const |
virtual void | addCropHandles (SdrHdlList &rTarget) const |
virtual bool | hasSpecialDrag () const |
The standard transformations (Move,Resize,Rotate,Mirror,Shear) are taken over by the View (TakeXorPoly(),...). More... | |
virtual bool | beginSpecialDrag (SdrDragStat &rDrag) const |
virtual bool | applySpecialDrag (SdrDragStat &rDrag) |
virtual OUString | getSpecialDragComment (const SdrDragStat &rDrag) const |
virtual basegfx::B2DPolyPolygon | getSpecialDragPoly (const SdrDragStat &rDrag) const |
virtual bool | supportsFullDrag () const |
virtual rtl::Reference< SdrObject > | getFullDragClone () const |
virtual bool | BegCreate (SdrDragStat &rStat) |
Every object must be able to create itself interactively. More... | |
virtual bool | MovCreate (SdrDragStat &rStat) |
virtual bool | EndCreate (SdrDragStat &rStat, SdrCreateCmd eCmd) |
virtual bool | BckCreate (SdrDragStat &rStat) |
virtual void | BrkCreate (SdrDragStat &rStat) |
virtual PointerStyle | GetCreatePointer () const |
get the cursor/pointer that signals creating this object More... | |
virtual basegfx::B2DPolyPolygon | TakeCreatePoly (const SdrDragStat &rDrag) const |
Polygon dragged by the user when creating the object. More... | |
virtual void | NbcMove (const Size &rSiz) |
The methods Move, Resize, Rotate, Mirror, Shear, SetSnapRect and SetLogicRect call the corresponding Nbc-methods, send a Repaint broadcast and set the Modified state on the Model. More... | |
virtual void | NbcResize (const Point &rRef, const Fraction &xFact, const Fraction &yFact) |
virtual void | NbcCrop (const basegfx::B2DPoint &rRef, double fxFact, double fyFact) |
virtual void | NbcRotate (const Point &rRef, Degree100 nAngle, double sn, double cs)=0 |
void | NbcRotate (const Point &rRef, Degree100 nAngle) |
virtual void | NbcMirror (const Point &rRef1, const Point &rRef2) |
virtual void | NbcShear (const Point &rRef, Degree100 nAngle, double tn, bool bVShear) |
virtual void | Move (const Size &rSiz) |
virtual void | Resize (const Point &rRef, const Fraction &xFact, const Fraction &yFact, bool bUnsetRelative=true) |
virtual void | Crop (const basegfx::B2DPoint &rRef, double fxFact, double fyFact) |
virtual void | Rotate (const Point &rRef, Degree100 nAngle, double sn, double cs) |
virtual void | Mirror (const Point &rRef1, const Point &rRef2) |
virtual void | Shear (const Point &rRef, Degree100 nAngle, double tn, bool bVShear) |
virtual void | NbcSetRelativePos (const Point &rPnt) |
The relative position of a SdrObject is the distance of the upper left corner of the logic bounding rectangle (SnapRect) to the anchor. More... | |
virtual void | SetRelativePos (const Point &rPnt) |
virtual Point | GetRelativePos () const |
void | ImpSetAnchorPos (const Point &rPnt) |
virtual void | NbcSetAnchorPos (const Point &rPnt) |
virtual void | SetAnchorPos (const Point &rPnt) |
virtual void | RecalcSnapRect () |
Snap is not done on the BoundRect but if possible on logic coordinates (i.e. More... | |
virtual const tools::Rectangle & | GetSnapRect () const |
virtual void | SetSnapRect (const tools::Rectangle &rRect) |
virtual void | NbcSetSnapRect (const tools::Rectangle &rRect) |
virtual const tools::Rectangle & | GetLogicRect () const |
virtual void | SetLogicRect (const tools::Rectangle &rRect) |
virtual void | NbcSetLogicRect (const tools::Rectangle &rRect) |
virtual void | AdjustToMaxRect (const tools::Rectangle &rMaxRect, bool bShrinkOnly=false) |
virtual Degree100 | GetRotateAngle () const |
virtual Degree100 | GetShearAngle (bool bVertical=false) const |
virtual sal_uInt32 | GetSnapPointCount () const |
snap to special points of an Object (polygon points, center of circle) More... | |
virtual Point | GetSnapPoint (sal_uInt32 i) const |
virtual bool | IsPolyObj () const |
virtual sal_uInt32 | GetPointCount () const |
virtual Point | GetPoint (sal_uInt32 i) const |
void | SetPoint (const Point &rPnt, sal_uInt32 i) |
virtual void | NbcSetPoint (const Point &rPnt, sal_uInt32 i) |
virtual std::unique_ptr< SdrObjGeoData > | GetGeoData () const |
virtual void | SetGeoData (const SdrObjGeoData &rGeo) |
const SfxItemSet & | GetMergedItemSet () const |
void | SetMergedItem (const SfxPoolItem &rItem) |
void | ClearMergedItem (const sal_uInt16 nWhich=0) |
void | SetMergedItemSet (const SfxItemSet &rSet, bool bClearAllItems=false) |
const SfxPoolItem & | GetMergedItem (const sal_uInt16 nWhich) const |
template<class T > | |
const T & | GetMergedItem (TypedWhichId< T > nWhich) const |
void | SetMergedItemSetAndBroadcast (const SfxItemSet &rSet, bool bClearAllItems=false) |
void | TakeNotPersistAttr (SfxItemSet &rAttr) const |
void | ApplyNotPersistAttr (const SfxItemSet &rAttr) |
void | NbcApplyNotPersistAttr (const SfxItemSet &rAttr) |
void | SetStyleSheet (SfxStyleSheet *pNewStyleSheet, bool bDontRemoveHardAttr) |
void | NbcSetStyleSheet (SfxStyleSheet *pNewStyleSheet, bool bDontRemoveHardAttr) |
SfxStyleSheet * | GetStyleSheet () const |
virtual bool | HasTextEdit () const |
void | SetOutlinerParaObject (std::optional< OutlinerParaObject > pTextObject) |
virtual void | NbcSetOutlinerParaObject (std::optional< OutlinerParaObject > pTextObject) |
virtual OutlinerParaObject * | GetOutlinerParaObject () const |
virtual void | NbcReformatText () |
void | BurnInStyleSheetAttributes () |
virtual bool | HasMacro () const |
virtual SdrObject * | CheckMacroHit (const SdrObjMacroHitRec &rRec) const |
virtual PointerStyle | GetMacroPointer (const SdrObjMacroHitRec &rRec) const |
virtual void | PaintMacro (OutputDevice &rOut, const tools::Rectangle &rDirtyRect, const SdrObjMacroHitRec &rRec) const |
virtual bool | DoMacro (const SdrObjMacroHitRec &rRec) |
bool | IsMacroHit (const SdrObjMacroHitRec &rRec) const |
virtual SdrGluePoint | GetVertexGluePoint (sal_uInt16 nNum) const |
virtual SdrGluePoint | GetCornerGluePoint (sal_uInt16 nNum) const |
virtual const SdrGluePointList * | GetGluePointList () const |
virtual SdrGluePointList * | ForceGluePointList () |
void | SetGlueReallyAbsolute (bool bOn) |
void | NbcRotateGluePoints (const Point &rRef, Degree100 nAngle, double sn, double cs) |
void | NbcMirrorGluePoints (const Point &rRef1, const Point &rRef2) |
void | NbcShearGluePoints (const Point &rRef, double tn, bool bVShear) |
virtual void | ConnectToNode (bool bTail1, SdrObject *pObj) |
virtual void | DisconnectFromNode (bool bTail1) |
virtual SdrObject * | GetConnectedNode (bool bTail1) const |
virtual void | SetContextWritingMode (const sal_Int16 _nContextWritingMode) |
virtual rtl::Reference< SdrObject > | DoConvertToPolyObj (bool bBezier, bool bAddText) const |
rtl::Reference< SdrObject > | ConvertToPolyObj (bool bBezier, bool bLineToArea) const |
rtl::Reference< SdrObject > | ConvertToContourObj (SdrObject *pRet, bool bForceLineDash=false) const |
bool | IsVirtualObj () const |
bool | IsClosedObj () const |
void | InsertedStateChange () |
bool | IsInserted () const |
bool | IsEdgeObj () const |
bool | Is3DObj () const |
bool | IsUnoObj () const |
void | SetMoveProtect (bool bProt) |
bool | IsMoveProtect () const |
void | SetResizeProtect (bool bProt) |
bool | IsResizeProtect () const |
void | SetPrintable (bool bPrn) |
bool | IsPrintable () const |
void | SetVisible (bool bVisible) |
bool | IsVisible () const |
void | SetMarkProtect (bool bProt) |
bool | IsMarkProtect () const |
virtual bool | IsSdrTextObj () const |
virtual bool | IsTextPath () const |
virtual bool | shouldKeepAspectRatio () const |
Whether the aspect ratio should be kept by default when resizing. More... | |
sal_uInt16 | GetUserDataCount () const |
SdrObjUserData * | GetUserData (sal_uInt16 nNum) const |
void | AppendUserData (std::unique_ptr< SdrObjUserData > pData) |
void | DeleteUserData (sal_uInt16 nNum) |
virtual css::uno::Reference< css::drawing::XShape > | getUnoShape () |
void | notifyShapePropertyChange (const svx::ShapePropertyProviderId _eProperty) const |
void | registerProvider (const svx::ShapePropertyProviderId _eProperty, std::unique_ptr< svx::PropertyValueProvider > propProvider) |
virtual bool | TRGetBaseGeometry (basegfx::B2DHomMatrix &rMatrix, basegfx::B2DPolyPolygon &rPolyPolygon) const |
virtual void | TRSetBaseGeometry (const basegfx::B2DHomMatrix &rMatrix, const basegfx::B2DPolyPolygon &rPolyPolygon) |
bool | IsInDestruction () const |
bool | HasFillStyle () const |
bool | HasLineStyle () const |
const tools::Rectangle & | GetBLIPSizeRectangle () const |
void | SetBLIPSizeRectangle (const tools::Rectangle &aRect) |
virtual bool | HasText () const |
bool | Equals (const SdrObject &) const |
virtual void | dumpAsXml (xmlTextWriterPtr pWriter) const |
virtual bool | IsTextBox () const |
Is this a textbox of a drawinglayer shape? More... | |
void | SetEmptyPresObj (bool bEpt) |
bool | IsEmptyPresObj () const |
void | SetNotVisibleAsMaster (bool bFlg) |
bool | IsNotVisibleAsMaster () const |
void | SetUserCall (SdrObjUserCall *pUser) |
SdrObjUserCall * | GetUserCall () const |
void | SetDoNotInsertIntoPageAutomatically (bool bSet) |
bool | IsDoNotInsertIntoPageAutomatically () const |
sal_uInt32 | GetOrdNumDirect () const |
bool | DoesSupportTextIndentingOnLineWidthChange () const |
const Point & | GetAnchorPos () const |
bool | LineIsOutsideGeometry () const |
void | SetNavigationPosition (const sal_uInt32 nPosition) |
virtual void | setUnoShape (const css::uno::Reference< css::drawing::XShape > &_rxUnoShape) |
Sets a new UNO representation of the shape. More... | |
const css::uno::WeakReference< css::drawing::XShape > & | getWeakUnoShape () const |
bool | setSuitableOutlinerBg (Outliner &rOutliner) const |
const Graphic * | getFillGraphic () const |
const OUString & | getHyperlink () const |
void | setHyperlink (const OUString &sHyperlink) |
void | ForceMetricToItemPoolMetric (basegfx::B2DPolyPolygon &rPolyPolygon) const noexcept |
Public Member Functions inherited from SfxListener | |
SfxListener () | |
SfxListener (const SfxListener &rCopy) | |
virtual | ~SfxListener () COVERITY_NOEXCEPT_FALSE |
void | StartListening (SfxBroadcaster &rBroadcaster, DuplicateHandling eDuplicateHanding=DuplicateHandling::Unexpected) |
void | EndListening (SfxBroadcaster &rBroadcaster, bool bRemoveAllDuplicates=false) |
void | EndListeningAll () |
bool | IsListening (SfxBroadcaster &rBroadcaster) const |
sal_uInt16 | GetBroadcasterCount () const |
SfxBroadcaster * | GetBroadcasterJOE (sal_uInt16 nNo) const |
virtual void | Notify (SfxBroadcaster &rBC, const SfxHint &rHint) |
void | RemoveBroadcaster_Impl (SfxBroadcaster &rBC) |
virtual bool | IsSdrView () const |
Public Member Functions inherited from cppu::OWeakObject | |
OWeakObject () | |
OWeakObject (const OWeakObject &) | |
OWeakObject &SAL_CALL | operator= (const OWeakObject &) |
virtual css::uno::Any SAL_CALL | queryInterface (const css::uno::Type &rType) SAL_OVERRIDE |
virtual void SAL_CALL | acquire () SAL_NOEXCEPT SAL_OVERRIDE |
virtual void SAL_CALL | release () SAL_NOEXCEPT SAL_OVERRIDE |
virtual css::uno::Reference< css::uno::XAdapter > SAL_CALL | queryAdapter () SAL_OVERRIDE |
SAL_CALL | operator css::uno::Reference< css::uno::XInterface > () |
virtual sal_Int32 | getTextCount () const =0 |
Return the number of texts available for this object. More... | |
virtual SdrText * | getText (sal_Int32 nIndex) const =0 |
Return the nth available text. More... | |
Protected Member Functions | |
virtual std::unique_ptr< sdr::contact::ViewContact > | CreateObjectSpecificViewContact () override |
Protected Member Functions inherited from SdrRectObj | |
virtual std::unique_ptr< sdr::contact::ViewContact > | CreateObjectSpecificViewContact () override |
virtual std::unique_ptr< sdr::properties::BaseProperties > | CreateObjectSpecificProperties () override |
XPolygon | ImpCalcXPoly (const tools::Rectangle &rRect1, tools::Long nRad1) const |
void | SetXPolyDirty () |
virtual void | RecalcXPoly () |
Subclasses should override RecalcXPoly() by creating an XPolygon instance with new and assigning it to mpXPoly. More... | |
const XPolygon & | GetXPoly () const |
virtual void | RestoreGeoData (const SdrObjGeoData &rGeo) override |
virtual | ~SdrRectObj () override |
Protected Member Functions inherited from SdrTextObj | |
virtual std::unique_ptr< sdr::properties::BaseProperties > | CreateObjectSpecificProperties () override |
virtual std::unique_ptr< sdr::contact::ViewContact > | CreateObjectSpecificViewContact () override |
tools::Rectangle const & | getRectangle () const |
void | setRectangle (tools::Rectangle const &rRectangle) |
void | setRectangleSize (sal_Int32 nWidth, sal_Int32 nHeight) |
void | moveRectangle (sal_Int32 nXDelta, sal_Int32 nYDelta) |
void | moveRectanglePosition (sal_Int32 nX, sal_Int32 nY) |
virtual rtl::Reference< SdrObject > | getFullDragClone () const override |
SdrOutliner & | ImpGetDrawOutliner () const |
bool | ImpCanConvTextToCurve () const |
rtl::Reference< SdrPathObj > | ImpConvertMakeObj (const basegfx::B2DPolyPolygon &rPolyPolygon, bool bClosed, bool bBezier) const |
rtl::Reference< SdrObject > | ImpConvertAddText (rtl::Reference< SdrObject > pObj, bool bBezier) const |
void | ImpSetTextStyleSheetListeners () |
void | ImpCheckShear () |
tools::Rectangle | ImpDragCalcRect (const SdrDragStat &rDrag) const |
void | ImpSetTextEditParams () const |
void | SetTextSizeDirty () |
void | ImpSetContourPolygon (SdrOutliner &rOutliner, tools::Rectangle const &rAnchorRect, bool bLineWidth) const |
virtual std::unique_ptr< SdrObjGeoData > | NewGeoData () const override |
A derived class must override these 3 methods if it has own geometric data that must be saved for Undo. More... | |
virtual void | SaveGeoData (SdrObjGeoData &rGeo) const override |
virtual void | RestoreGeoData (const SdrObjGeoData &rGeo) override |
void | NbcSetEckenradius (tools::Long nRad) |
virtual void | AdaptTextMinSize () |
SdrTextObj (SdrModel &rSdrModel) | |
SdrTextObj (SdrModel &rSdrModel, const tools::Rectangle &rNewRect) | |
SdrTextObj (SdrModel &rSdrModel, SdrObjKind eNewTextKind) | |
SdrTextObj (SdrModel &rSdrModel, SdrObjKind eNewTextKind, const tools::Rectangle &rNewRect) | |
SdrTextObj (SdrModel &rSdrModel, SdrTextObj const &rSource) | |
virtual | ~SdrTextObj () override |
Protected Member Functions inherited from SdrAttrObj | |
virtual std::unique_ptr< sdr::properties::BaseProperties > | CreateObjectSpecificProperties () override |
sal_Int32 | ImpGetLineWdt () const |
Detects the width of the line. No line ->0. More... | |
virtual void | Notify (SfxBroadcaster &rBC, const SfxHint &rHint) override |
Detects when a stylesheet is changed. More... | |
SdrAttrObj (SdrModel &rSdrModel) | |
SdrAttrObj (SdrModel &rSdrModel, SdrAttrObj const &) | |
virtual | ~SdrAttrObj () override |
Protected Member Functions inherited from SdrObject | |
const tools::Rectangle & | getOutRectangle () const |
void | setOutRectangleConst (tools::Rectangle const &rRectangle) const |
void | setOutRectangle (tools::Rectangle const &rRectangle) |
void | resetOutRectangle () |
void | moveOutRectangle (sal_Int32 nXDelta, sal_Int32 nYDelta) |
virtual | ~SdrObject () override |
virtual std::unique_ptr< sdr::properties::BaseProperties > | CreateObjectSpecificProperties () |
virtual std::unique_ptr< sdr::contact::ViewContact > | CreateObjectSpecificViewContact () |
tools::Rectangle | ImpDragCalcRect (const SdrDragStat &rDrag) const |
OUString | ImpGetDescriptionStr (TranslateId pStrCacheID) const |
void | ImpForcePlusData () |
OUString | GetMetrStr (tools::Long nVal) const |
virtual std::unique_ptr< SdrObjGeoData > | NewGeoData () const |
A derived class must override these 3 methods if it has own geometric data that must be saved for Undo. More... | |
virtual void | SaveGeoData (SdrObjGeoData &rGeo) const |
virtual void | RestoreGeoData (const SdrObjGeoData &rGeo) |
const SfxItemSet & | GetObjectItemSet () const |
void | SetObjectItem (const SfxPoolItem &rItem) |
void | SetObjectItemSet (const SfxItemSet &rSet) |
const SfxPoolItem & | GetObjectItem (const sal_uInt16 nWhich) const |
template<class T > | |
const T & | GetObjectItem (TypedWhichId< T > nWhich) const |
const SfxItemSet * | getBackgroundFillSet () const |
virtual void | InternalSetStyleSheet (SfxStyleSheet *pNewStyleSheet, bool bDontRemoveHardAttr, bool bBroadcast) |
Protected Member Functions inherited from cppu::OWeakObject | |
virtual | ~OWeakObject () COVERITY_NOEXCEPT_FALSE |
void | disposeWeakConnectionPoint () |
Protected Member Functions inherited from svx::ITextProvider | |
~ITextProvider () | |
Private Member Functions | |
SVX_DLLPRIVATE void | CreateUnoControlModel (const OUString &rModelName) |
SVX_DLLPRIVATE void | CreateUnoControlModel (const OUString &rModelName, const css::uno::Reference< css::lang::XMultiServiceFactory > &rxSFac) |
SVX_DLLPRIVATE bool | impl_getViewContact (sdr::contact::ViewContactOfUnoControl *&_out_rpContact) const |
Retrieves the typed ViewContact for the object. More... | |
Private Attributes | |
std::unique_ptr< SdrUnoObjDataHolder > | m_pImpl |
OUString | aUnoControlModelTypeName |
OUString | aUnoControlTypeName |
Friends | |
class | SdrPageView |
class | SdrControlEventListenerImpl |
Additional Inherited Members | |
Static Public Member Functions inherited from SdrTextObj | |
static void | impDecomposeBlockTextPrimitiveDirect (drawinglayer::primitive2d::Primitive2DContainer &rTarget, SdrOutliner &rOutliner, const basegfx::B2DHomMatrix &rNewTransformA, const basegfx::B2DHomMatrix &rNewTransformB, const basegfx::B2DRange &rClipRange) |
static bool | HasTextImpl (SdrOutliner const *pOutliner) |
returns false if the given pointer is NULL or if the given SdrOutliner contains no text. More... | |
Static Public Member Functions inherited from SdrObject | |
static SdrItemPool & | GetGlobalDrawObjectItemPool () |
template<class T > | |
static rtl::Reference< T > | Clone (T const &rObj, SdrModel &rTargetModel) |
static SdrObject * | getSdrObjectFromXShape (const css::uno::Reference< css::uno::XInterface > &xInt) |
Static Protected Member Functions inherited from SdrTextObj | |
static void | ImpSetCharStretching (SdrOutliner &rOutliner, const Size &rTextSize, const Size &rShapeSize, Fraction &rFitXCorrection) |
static void | ImpJustifyRect (tools::Rectangle &rRect) |
Definition at line 43 of file svdouno.hxx.
|
explicit |
Definition at line 136 of file svdouno.cxx.
References CreateUnoControlModel(), SdrObject::m_bIsUnoObj, m_pImpl, m_pImpl, cppu::OWeakObject::m_refCount, and SdrControlEventListenerImpl.
Referenced by CloneSdrObject().
Definition at line 153 of file svdouno.cxx.
References aStr, aUnoControlModelTypeName, aUnoControlTypeName, DBG_UNHANDLED_EXCEPTION, GetUnoControlModel(), SdrObject::m_bIsUnoObj, m_pImpl, m_pImpl, SdrControlEventListenerImpl, and xUnoControlModel.
SdrUnoObj::SdrUnoObj | ( | SdrModel & | rSdrModel, |
const OUString & | rModelName, | ||
const css::uno::Reference< css::lang::XMultiServiceFactory > & | rxSFac | ||
) |
|
overridevirtual |
Definition at line 211 of file svdouno.cxx.
References m_pImpl, TOOLS_WARN_EXCEPTION, and xUnoControlModel.
|
overridevirtual |
|
overrideprotectedvirtual |
Reimplemented from SdrRectObj.
Definition at line 499 of file svdouno.cxx.
|
private |
Definition at line 375 of file svdouno.cxx.
References aUnoControlModelTypeName, DBG_ASSERT, SdrObject::SetChanged(), SetUnoControlModel(), xModel, and xUnoControlModel.
Referenced by SdrUnoObj().
|
private |
|
overridevirtual |
uno::Reference< awt::XControl > SdrUnoObj::GetTemporaryControlForWindow | ( | const vcl::Window & | _rWindow, |
css::uno::Reference< css::awt::XControlContainer > & | _inout_ControlContainer | ||
) | const |
Retrieves a temporary XControl instance for a given output device.
The method GetUnoControl, used to retrieve the XControl whose parent is a given device, only works if the SdrUnoObj has already been painted at least once onto this device. However, there are valid scenarios where you need certain information on how a control is painted onto a window, without actually painting it. For example, you might be interested in the DeviceInfo of a UNO control.
For those cases, you can contain an XControl which behaves as the control which would be used to paint onto a window.
_rWindow | the window for which should act as parent for the temporary control |
_inout_ControlContainer | the control container belonging to the window, necessary as context for the newly created control. A control container is usually created by calling VCLUnoHelper::CreateControlContainer. If _inout_ControlContainer is <NULL>, it will be created internally, and passed to the caller. In this case, the caller also takes ownership of the control container, and is responsible for disposing it when not needed anymore. |
Definition at line 477 of file svdouno.cxx.
References sdr::contact::ViewContactOfUnoControl::getTemporaryControlForWindow(), and impl_getViewContact().
uno::Reference< awt::XControl > SdrUnoObj::GetUnoControl | ( | const SdrView & | _rView, |
const OutputDevice & | _rOut | ||
) | const |
Definition at line 453 of file svdouno.cxx.
References SdrPageView::FindPageWindow(), sdr::contact::ViewObjectContactOfUnoControl::getControl(), SdrPageWindow::GetObjectContact(), SdrPageView::GetPage(), SdrObject::getSdrPageFromSdrObject(), SdrPaintView::GetSdrPageView(), and SdrObject::GetViewContact().
Referenced by FmFormShell::GetFormControl(), and accessibility::AccessibleControlShape::Init().
|
inline |
Definition at line 88 of file svdouno.hxx.
Referenced by sdr::contact::ViewObjectContactOfUnoControl_Impl::createControlForDevice(), sdr::contact::ViewContactOfUnoControl::createViewIndependentPrimitive2DSequence(), SvxShapeControl::getControl(), svxform::FormControlFactory::initializeControlModel(), sdr::contact::ViewObjectContactOfUnoControl_Impl::isPrintableControl(), SdrUnoObj(), SetContextWritingMode(), FmFormShell::ToggleControlFocus(), and FmUndoModelReplaceAction::Undo().
|
inline |
Definition at line 122 of file svdouno.hxx.
|
inline |
Definition at line 121 of file svdouno.hxx.
Referenced by sdr::contact::ViewObjectContactOfUnoControl_Impl::createControlForDevice().
|
overridevirtual |
The standard transformations (Move,Resize,Rotate,Mirror,Shear) are taken over by the View (TakeXorPoly(),...).
Object type specific dragging like corner radius of Rectangle, control points of Splines, weights of Bezier curves, pointer of Label objects must be handled by the object itself. To keep the Model free of state, the state is kept in the View and then passed to the object. EndDrag usually returns true for success, false may be returned if the dragging did not modify the object, where the View already handles the case that the pointer was not moved at all.
Reimplemented from SdrRectObj.
Definition at line 312 of file svdouno.cxx.
|
private |
Retrieves the typed ViewContact for the object.
_out_rpContact | Upon successful return, ->_out_rpContact contains the ViewContact. |
Definition at line 490 of file svdouno.cxx.
References DBG_ASSERT, and SdrObject::GetViewContact().
Referenced by GetTemporaryControlForWindow(), and SetUnoControlModel().
|
overridevirtual |
Reimplemented from SdrRectObj.
Definition at line 290 of file svdouno.cxx.
References Bottom, SdrTextObj::getRectangle(), Left, GeoStat::m_nRotationAngle, GeoStat::m_nShearAngle, SdrTextObj::maGeo, GeoStat::mfCosRotationAngle, GeoStat::mfSinRotationAngle, GeoStat::mfTanShearAngle, SdrTextObj::moveRectangle(), SdrRectObj::NbcResize(), Right, SdrObject::SetBoundAndSnapRectsDirty(), and Top.
|
overridevirtual |
Reimplemented from SdrObject.
Definition at line 319 of file svdouno.cxx.
References o3tl::sorted_vector< typename Value, typename Compare, template< typename, typename > class Find, bool >::erase(), SdrViewIter::ForAllViews(), SdrObject::GetLayer(), o3tl::sorted_vector< typename Value, typename Compare, template< typename, typename > class Find, bool >::insert(), and SdrObject::NbcSetLayer().
|
overridevirtual |
Reimplemented from SdrObject.
Definition at line 256 of file svdouno.cxx.
References DBG_UNHANDLED_EXCEPTION, and GetUnoControlModel().
|
virtual |
Definition at line 414 of file svdouno.cxx.
References aStr, aUnoControlTypeName, sdr::contact::ViewContact::flushViewObjectContacts(), SdrObject::GetViewContact(), impl_getViewContact(), m_pImpl, xModel, and xUnoControlModel.
Referenced by CreateUnoControlModel(), SvxShapeControl::setControl(), and FmUndoModelReplaceAction::Undo().
|
overridevirtual |
Reimplemented from SdrRectObj.
Definition at line 233 of file svdouno.cxx.
References SdrObjTransformInfoRec::bCanConvToContour, SdrObjTransformInfoRec::bCanConvToPath, SdrObjTransformInfoRec::bCanConvToPathLineToArea, SdrObjTransformInfoRec::bCanConvToPoly, SdrObjTransformInfoRec::bCanConvToPolyLineToArea, SdrObjTransformInfoRec::bEdgeRadiusAllowed, SdrObjTransformInfoRec::bMirror45Allowed, SdrObjTransformInfoRec::bMirror90Allowed, SdrObjTransformInfoRec::bMirrorFreeAllowed, SdrObjTransformInfoRec::bNoOrthoDesired, SdrObjTransformInfoRec::bRotate90Allowed, SdrObjTransformInfoRec::bRotateFreeAllowed, SdrObjTransformInfoRec::bShearAllowed, and SdrObjTransformInfoRec::bTransparenceAllowed.
|
overridevirtual |
|
overridevirtual |
Reimplemented from SdrRectObj.
Definition at line 269 of file svdouno.cxx.
References aName, SdrObject::GetName(), sName, and SvxResId().
|
friend |
Definition at line 46 of file svdouno.hxx.
Referenced by SdrUnoObj().
|
friend |
Definition at line 45 of file svdouno.hxx.
|
private |
Definition at line 50 of file svdouno.hxx.
Referenced by CreateUnoControlModel(), and SdrUnoObj().
|
private |
Definition at line 51 of file svdouno.hxx.
Referenced by SdrUnoObj(), and SetUnoControlModel().
|
private |
Definition at line 48 of file svdouno.hxx.
Referenced by SdrUnoObj(), SetUnoControlModel(), and ~SdrUnoObj().
|
protected |
Definition at line 54 of file svdouno.hxx.
Referenced by CreateUnoControlModel(), SdrControlEventListenerImpl::disposing(), SdrUnoObj(), SetUnoControlModel(), and ~SdrUnoObj().